Тривалість: 1–2 години
Термін дії сертифіката: 3 роки
Лише 39€
Тривалість: 2 годиниТермін дії сертифіката: 3 рокиЛише 39€
Тривалість: 2 годиниТермін дії сертифіката: 3 рокиЛише 39€Готові почати?
Coming Soon
Average Duration: 2 Hour
Digital & Printable Certificate
Unlimited Exam Attempts
Accepted Across Ireland, UK and Europe
Valid For 3 Years
Self-Paced. Available 24/7
Available On All Major Devices
Live Student Support
Permanent Record Of Training
User Management Tools Available
Abrasive Wheels Training
Середня тривалість: 2 години
Цифровий та друкований сертифікат
Необмежена кількість спроб складання екзамену
Визнається в Ірландії, Великобританії та Європі
Дійсний протягом 3 років
Самостійне навчання. Доступно 24/7
Доступний на всіх основних пристроях
Жива підтримка студентів
Постійний запис навчання
Доступні інструменти управління користувачами
Abrasive Wheels Training Course
Nearly half of all accidents resulting from abrasive wheels happen due to unsafe working practices and operator errors. If you work with abrasive wheels then following strict health and safety practices is paramount to protect both yourself and others from harm.
This Abrasive Wheels course will provide you with an introduction to working safely with abrasive wheels so that you can understand the risks and know which control measures are needed to prevent injury and ill-health.
Who Should Take This Course?
This course is suitable for anyone who uses abrasive wheels in their work activities. The course is particularly relevant for those who use bench grinders, pedestal grinders and angle grinders. Although the training doesn't cover the use of specialist grinding machines, the health and safety information throughout the course is still applicable. This course has been written at an introductory level and no pre-requisite training is required. Experience of using abrasive wheels would be advantageous.
This certified online training is ideal for people working in positions such as, but not limited to:
Engineer
Builder / Floor Layer / Bricklayer
Electrician
Carpenter / Joiner / Fitter
Site / Project Manager
Welder
Course Content
The course is divided into four accessible, interactive modules and also includes an assessment at the end:
| Module | Description | |
|---|---|---|
| 1 | Introduction to Abrasive Wheels |
Types of abrasive wheels, dangers of abrasive wheels, abrasive wheels and the law, manufacturers responsibilities, employer responsibilities, employee responsibilities, HSE guidance. |
| 2 | Risk Assessment |
What is a risk assessment?, who should carry out a risk assessment?, Step One: Identifying hazards, Step Two: Decide who might be harmed and how, Step Three: Evaluate the risks, Step Four: Record the findings, and Step Five: Review and update. |
| 3 | Safe Practices for Abrasive Wheels |
The hierarchy of control, wheel speed, wheel handling and storage, wheel mounting, mechanical guards and work rests, safe working practices, inspections and checks and safely dressing abrasive wheels. |
| 4 | Further Abrasive Wheel Hazards and Controls |
Prevention of eye and face injuries, harmful dusts, vibration control, noise reduction and control, fire risks, electrical safety, hand-held grinding and cutting-off tools, training, communication and monitoring, Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013 (RIDDOR), first aid and emergency procedures. |
Aims of the Training
By completing this training, you will:
- Identify the main types of abrasive wheels and their equipment, and will understand the hazards and risks associated with them.
- Understand the legal requirements placed on manufacturers, employers and employees for the safe use of abrasive wheels.
- Know how to carry out a risk assessment for the safe use of abrasive wheels.
- Be aware of the control measures needed to reduce or eliminate the risks associated with abrasive wheels,
including harmful dusts, vibration, noise, fire and electrical risks. - Understand how to safely handle, store, mount, use, dress and inspect the main types of abrasive wheels.
Assessment
The online assessment is taken on completion of the training material. You will be asked 20 multiple choice questions with a pass mark of 80%. The answers are marked automatically so you will instantly know whether you have passed. If you don't pass don't worry! You can take the test as many times as you need with no extra charge.
Manual Handling Training
Середня тривалість: 1 година
Цифровий та друкований сертифікат
Необмежена кількість спроб складання екзамену
Визнається в Ірландії, Великобританії та Європі
Дійсний протягом 3 років
Самостійне навчання. Доступно 24/7
Доступний на всіх основних пристроях
Жива підтримка студентів
Постійний запис навчання
Доступні інструменти управління користувачами
Online Manual Handling Training Course
Also referred to as Moving and Handling Training.
This Manual Handling Training Course helps employers ensure that they and their employees are sufficiently trained in the principles and practices of safe manual handling.
This course provides the necessary information and training for organisations to understand more about the risks associated with manual handling, how to undergo a risk assessment and how to ensure appropriate control measures are put in place.
It follows the requirements of the Manual Handling Operations Regulations 1992 (MHOR) and provides a practical guide for managing and carrying out safe and healthy manual handling. The course also features videos, diagrams, and downloadable resources to use in your workplace.
- Ensures compliance with Irish Health and Safety legislation
- Matches the CIEH Level 2 Syllabus
- Developed by FETAC Level 6 Instructor♻️
- Fully online course and assessment with no time limits
- Approximate duration: 1 hour
- On completion, download and print your certificate
Who Should Take This Manual Handling Training Course?
The manual handling course is aimed at employees at all levels who may undertake manual handling operations, including the transporting of a load of items by lifting, lowering, pushing, pulling, carrying, manoeuvring, steadying or transporting thereof by hand or by bodily force. This includes, but is not limited to, professions such as:
- Warehouse and factory staff
- Heavy manual labourers
- Construction and building site workers
- Office workers
- Delivery drivers
- Agricultural workers
Course Content
| MODULE | DESCRIPTION | |
|---|---|---|
| 2 | Manual Handling Injuries | types of injury, immediate injuries and musculoskeletal disorders. |
| 3 | Risk Assessments for Safe Manual Handling | what is a risk assessment?, who should carry out a risk assessment?, identifying hazards, TILE, factors that increase the risk of harm, deciding who may be harmed and how, occupations most at risk, evaluating risks, recording the significant findings, reviewing and updating, results of your risk assessment. |
| 4 | Avoiding and Controlling the Risks | employer duties, avoiding manual handling, reducing the risk, team handling, mechanical and automation precautions, personal protective equipment and TILE. |
| 5 | Safe Manual Handling Techniques | lifting and lowering techniques, safe weights for lifting and lowering, carrying, risk assessments and HSE tools, pushing and pulling, and team handling. |
Aims of the Manual Handling Training
Upon completion of this course, you will:
- Understand what is meant by manual handling.
- Be able to explain the common causes of injury and potential long-term damages to health as a result of poor manual handling techniques.
- Understand the legal responsibilities and the duties placed upon employers and employees.
- Be able to identify manual handling hazards.
- Understand how to carry out an effective manual handling risk assessment.
- Understand the control measures that can be put in place to reduce the risk of harm.
- Understand and practise the best way to handle loads to maintain a safe working environment.
Assessment
The online assessment is taken on completion of the training material. You will be asked 10 multiple choice questions with a pass mark of 80%. The answers are marked automatically so that you’ll instantly know whether you passed. If you don't pass don't worry! You can take the test as many times as you need with no extra charge.
Working At Heights Training
Середня тривалість: 2-3 години
Цифровий та друкований сертифікат
Необмежена кількість спроб складання екзамену
Визнається в Ірландії, Великобританії та Європі
Дійсний протягом 3 років
Самостійне навчання. Доступно 24/7
Доступний на всіх основних пристроях
Жива підтримка студентів
Постійний запис навчання
Доступні інструменти управління користувачами
Падіння з висоти є однією з найпоширеніших причин травм на роботі. Вони можуть призвести до серйозних травм та загибелі людей під час роботи та перехожих, включаючи тих, хто виконує будівельні та ремонтні роботи, а також перехожих. Тому важливо, щоб кожен, хто проводить роботи на висоті, розумів, як працювати безпечно та відповідально та відповідно до закону.
Цей навчальний курс "Робота на висоті" допоможе вам дотримуватися нормативів роботи на висоті, надаючи роботодавцям та працівникам необхідну інформацію, яка потрібна для успішного вирішення ризиків роботи на висоті та контрольних заходів. Це включає розуміння того, як проводити оцінку ризиків роботи на висоті для ефективного контролю та управління ризиками, як безпечно використовувати обладнання для доступу та як забезпечити зниження ризику падіння працівників з висоти.
Кому слід проходити цей навчальний курс по роботі на висоті?
Будь-яка особа, яка працює на висоті в будь-якому місці, включаючи місце на рівні землі або нижче, повинна проходити навчання, щоб довести, що вона компетентна та безпечна у своїй роботі. Це обов'язок роботодавця забезпечити надання цього навчання: Згідно з регламентом 5 про роботу на висоті, роботодавці повинні забезпечувати компетентність всіх працівників, які займаються будь-якою роботою на висоті. Це включає, але не обмежується такими професіями, як:
- Чистка жолобів.
- Установка сонячних панелей.
- Створення дисплеїв.
- Дрібні дахові роботи.
- Укладання полиць.
- Миття вікон.
- Розвантаження транспортного засобу.
- Обслуговування машин.
- Екскавації.
Мета навчання з роботи на висоті
До кінця цього курсу слухачі зможуть:
- Розуміти основні особливості та вимоги до регламентації роботи на висоті.
- Наводити приклади звичайних завдань з роботи на висоті та розуміти пов'язані з ними небезпеки та ризики.
- Визначати фактори, які спричинюють падіння осіб та предметів з висоти.
- Описувати заходи контролю, які контролюють та знижують ризик падінь з висоти.
- Розуміти правильне використання обладнання для доступу та роботи на висоті та безпечні методи доступу для зниження або усунення ризику падінь.
| Онлайн-оцінка проводиться після завершення навчального матеріалу. Вам буде запропоновано 20 питань із варіантами відповідей із мінімальним порогом проходження 80%. Якщо ви не пройшли, не хвилюйтесь! Ви можете пройти тест стільки разів, скільки потрібно, без додаткової оплати. |
|---|
Fire Safety Training
Середня тривалість: 2 години
Цифровий та друкований сертифікат
Необмежена кількість спроб складання екзамену
Визнається в Ірландії, Великобританії та Європі
Дійсний протягом 3 років
Самостійне навчання. Доступно 24/7
Доступний на всіх основних пристроях
Жива підтримка студентів
Постійний запис навчання
Доступні інструменти управління користувачами
This Fire Safety Training course teaches you about the various types of fire extinguishers and the techniques for using them. It explains how to assess the situation if a fire starts, such as determining the class of fire and deciding whether you should or shouldn’t fight it.
It also contains infographics and videos to illustrate how different extinguishers look and operate, as well as practical exercises throughout to test your knowledge of techniques. On completion of the course, you will feel confident to use extinguishers or a fire blanket safely and effectively during an emergency.
Who Should Take This Course?
This course is designed for the designated fire wardens or marshals in a workplace. While it is not a replacement for practical training in how to use fire extinguishers (which all fire wardens / marshals must receive), our course can be taken as an introduction to using fire extinguishers before you undergo practical training, as well as a refresher after receiving practical instruction.
Practical fire extinguisher training is typically refreshed every 3 years, so this course can act as a useful reminder in between your practical sessions. It'll solidify your knowledge and give you the confidence to use an extinguisher safely in an emergency.
Aims of the Training
By the end of this course, you will understand:
- The fire triangle and the different classes of fires.
- The various types of fire extinguishers that workplaces may use.
- What the responsibilities of fire wardens are regarding fire extinguishers and fighting fires.
- How to assess the situation if a fire starts and what first steps you should take before you attempt to fight it.
- Which extinguishers you can use to fight certain classes of fires.
- How to use the basic PASS method to use extinguishers.
- The specific techniques you must use for certain extinguishers to ensure safety and effectiveness.
- When and how to use a fire blanket.
| The online assessment is taken on completion of the training material. You will be asked 20 multiple choice questions with a pass mark of 90%. If you don't pass don't worry! You can take the test as many times as you need with no extra charge. |
|---|
Health and Safety at Work (Level 2)
Average Duration: 2-3 Hours
Digital & Printable Certificate
Unlimited Exam Attempts
Accepted Across Ireland, UK and Europe
Valid For 2 Years
Self-Paced. Available 24/7
Available On All Major Devices
Live Student Support
Permanent Record Of Training
User Management Tools Available
A thorough understanding of health and safety is essential in all workplaces, regardless of job role and industry. This accredited Level 2 Health and Safety course ensures that you understand the most common health and safety risks in your workplace and the control measures that are needed to keep you safe.
The course covers the most crucial aspects of health and safety that are present in every workplace, such as manual handling, working at height, and fire and electrical safety. It also explains the necessary components of workplace welfare, including workplace stress and conflict.
| Module | Description | |
|---|---|---|
| 1 | Risk Assessment |
What is a risk assessment, who should carry out a risk assessment, identify the hazards, decide who might be harmed and how, evaluate the risks and decide on controls, record your findings, and review and update the risk assessment. |
| 2 | Workplace Safety |
Safe systems of work, slips, trips and falls on the same level, falls from height, housekeeping, electrical safety, and fire safety. |
| 3 | Workplace Welfare |
Welfare facilities, first aid, first aid safety signs, workplace stress, drugs and alcohol, and workplace conflict and violence. |
| 4 | Manual Handling and Display Screen Equipment |
Manual handling regulations, reducing manual handling risks, good manual handling techniques, display screen equipment, and workstations. |
| 5 | Hazardous Substances and Working at Height |
Hazardous substances control measures, hazardous substances training, hazardous substances safety signs, working at height, control measures, working at height equipment, and safe use of ladders and stepladders. |
| 6 | Noise, Vibration and Vehicle Safety |
Noise elimination, reduction, and control, Hand-Arm Vibration Syndrome (HAVS) and Carpal Tunnel Syndrome (CTS), employer responsibilities, safe use of vehicles, and pedestrian-vehicle conflict. |
Aims of the Training
By completing this training, you will:
- Have knowledge of key health and safety topics and how to ensure good practice within them.
- Understand the responsibilities of employers and employees under health and safety legislation.
- Understand the importance of, and the key factors in, undertaking a risk assessment to prevent and control hazards.
- Know the hazards and ill health effects associated with specific work activities and processes.
Level 1&2 HACCP Training
Average Duration: 2-3 Hours
Digital & Printable Certificate
Unlimited Exam Attempts
Accepted Across Ireland, UK and Europe
Valid For 3 Years
Self-Paced. Available 24/7
Available On All Major Devices
Live Student Support
Permanent Record Of Training
User Management Tools Available
This Level 2 HACCP course will introduce learners to the Hazard Analysis and Critical Control Points management system and help you to understand how to comply with the law, how to work safely and efficiently and what each crucial step of the HACCP implementation process entails.
By the end of the course learners will have a thorough understanding of why HACCP is important, how the 7 HACCP principles can be implemented and what can be done to ensure the food handled in their business remains safe for the consumer.
Who Should Take This Course?
This Level 2 HACCP course is suitable for employees at all levels within a food business. This includes full-time, part-time and temporary workers.
The course aims to provide a comprehensive introduction to HACCP and teaches learners about what they can do to help their business implement the system and comply with the law.
| Module | Description | |
|---|---|---|
| 1 | Introduction to HACCP |
What is HACCP? Key terms, legislation, benefits of HACCP and enforcing the law. |
| 2 | Food Safety Hazards |
How contamination applies to HACCP, physical, chemical, microbial and allergenic contamination and cross contamination. |
| 3 | Principles and Prerequisites |
The 7 principles, examples of prerequisites, effective prerequisites and assessing prerequisites. |
| 4 | Creating a HACCP System |
The basics of HACCP, creating a HACCP team, describing the products and ingredients, identifying the products’ uses and consumers, constructing a flow diagram and confirming the flow diagram. |
| 5 | The 7 Principles: Hazard Analysis and Control Measures |
The 7 principles of HACCP, hazard analysis, determining critical control points, the codex decision tree and establishing critical limits. |
| 6 | The 7 Principles: Monitoring and Verification |
Monitoring critical control points, establishing corrective actions, establishing verification procedures, reviewing the HACCP plan and record keeping. |
Aims of the Training
By completing this training, you will:
- Understand the importance of having effective prerequisites in place before implementing a HACCP system.
- Know more about identifying food safety hazards and their appropriate control measures.
- Have knowledge of food hygiene legislation and recognise why HACCP is relevant.
- Understand the importance of continually monitoring the HACCP system.
- Understand what's involved in setting up a HACCP system.
- Understand the main categories of food safety hazards.
- Be aware of the 7 principles of HACCP.
| The online assessment is taken on completion of the training material. You will be asked 20 multiple choice questions with a pass mark of 80%. If you don't pass don't worry! You can take the test as many times as you need with no extra charge. |
|---|
Your username and password will be sent
to the email address entered below.
All information will remain private and will NOT be sold,
rented or traded to any 3rd party